In the classification operation of industrial production at this stage, Ultra-Micro Steam Jet Mill Classifier is mainly targeted for the effective smash of solid particles, and is the case where we are more commonly used in the product ultrafine pulverization process. equipment.
Ultra-Micro Steam Jet Mill Classifier should be installed in a place where the site is flat. Before you work, you should pick up the processed material, no metal, stone, etc., hard substances, mix into the machine, so as not to damage the parts in the machine or failure. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, turn it in 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge port should be tiered with a long cloth bag. When the pulverizer is in use, if you encounter a power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.Ultra-Micro Steam Jet Mill Classifier Principles: When the compressed gas enters the pulverizer through the feeder, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is injected, so that the material is affected by the gas stream. High-speed impact and material collision, friction, and pulverize the graded particles, the coarse particles are separated, and the coarse particle circulation continues to be pulverized. After the interior closed circuit is pulverized, ultrafine powder is finally distributed in the discharge port. . 1. Suitable for dry ultra-micro processes. Due to the large impact speed, it can be more than 2.5 mep, in general, it is easy to obtain 1-10 micron particles, depending on the properties of the material, it is possible to obtain less than 1 micron particles. 2. Because there is a closed circuit classification mechanism inside the pulverizer, the product is thick The particles constantly circulate, and thus the particles are uniform and the particle size distribution range is obtained. 3, the equipment has the advantages of short smashing time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency is high when pulverization, can be pulverized, and the purity of the pulverized product can be maintained.
Ultra-Micro Steam Jet Mill Classifier generates certain noise during production, the main reason for generating noise is:
(1) When the coal mill is running, the operating component drives air to generate \"whistle\" Sound \"Call:
(2) The device is running. The sound of vibration is generated; (3), the rubbing between the turntable or the hammer and the drug; the rotating part itself is friction.
For noise generated, the main solution is as follows:
(1) add lubricating oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
( 2) The heat generated during the broken process also produces noise, and cools the cooling of the crushing chamber, the muffler is mounted in the air intake port of the pulverization chamber; (3) damping the damping pad and other devices.
El Pie Battery Material Ultra-Micro Steam Jet Mill Classifier Case Sharing:
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 300kg
Need to purchase airflow pulverizer, air flow mill, ultrafine pulverizer, eddy current pulverizer, pharmaceutical gas flow crusher User users in ultrafine pulverizer, cone mixer, Chinese medicine crusher, etc. Can contact us.
