With the development of society and life, the demand for Vertical Steam Jet Mill Grinder is increasingly demand for Vertical Steam Jet Mill Grinder, and the requirements for fineness, purity, and pass rates are getting higher and higher. In the current market, there is a great development space.
The principle of the Vertical Steam Jet Mill Grinder is to use high-speed airflow to cause the material itself to collide with the particles of the material itself, and the airflow has caused the shear effect of the material impact, the impact of material and other components, etc. The material becomes more pulverized and the particle size distribution is narrower. Although in certain areas, Vertical Steam Jet Mill Grinder has an irreplaceable advantage, but it also has a shortcomings that feel a headache, that is, the energy consumption is relatively high. The principle has passed the time and multiple applications, which are more mature, and have been widely used in mineral materials, chemical materials, pharmaceuticals and other industries.
Vertical Steam Jet Mill Grinder Working Principle:
The power of the machine uses purified dry compressed air. The compressed air is sprayed to the crushing chamber at high speed over a special supersonic nozzle. The airflow has a high speed movement of the material, causing strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the particle size, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.
Let's take a look at the maintenance tips for eddy current pulverizer transmission chains!
The cable in the pulverizer should have a protective casing.
During the operation, at least at least one compressed air line is leaking, and the oil water separation is discharged once. Check if the unloading door is leaking weekly, whether the sealing strip is damaged, whether the unloading link mechanism is in a dead position. Clean the residual material attached to the inner wall of the bucket once a week. Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing each month. Clean the injector of the inner wall of the mixer and the residual attachment material on the inner wall of the mixer and the cover. Monthly measurement of the variation coefficient of the exit and the finished package port of the finished mixer, the determination of the variation coefficient should select the shortest mixed product.
In addition, users also need to check if the wire connection in the motor junction box is loose. Clean the residual materials attached to the inner wall of the mixer and buffer. Clean up the oil and water separation of three linkages to ensure smooth air paths.
El Pie Mill Grinder case share: This customer is a renewable resource company, the customer needs to select a different particle size selection of composite powder, and it is necessary to select ultrafine powder less than 30μm. . Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our Else, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.
In addition to the Vertical Steam Jet Mill Grinder, Elpai Technology Co., Ltd. also supplies powder grading machine, super fine classifier, precision classifier, ultrafine gas flow grading machine, jet grading machine, etc. Welcome to Buy!
