In many crushing methods, Ultra-Micro Mechanical Steam Jet Mill Classifier has become the most mainstream pulverization technique with a small particle size, narrow particle size distribution, high purity, high particulate activity, good dispersibility. First, especially for crushing drugs, etc., which are not allowed to be contaminated.
Ultra-Micro Mechanical Steam Jet Mill Classifier has generally replaced traditional mechanical pulverizer in real-production, and its characteristics are:
1, structure Simple, the disassembly and cleaning is simple, convenient, only one person can complete the operation, disassembly and packing.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Ultra-Micro Mechanical Steam Jet Mill Classifier causes the finished product to purity, no impurities, and non-pollutant materials due to its pulverization principle.
4, the pulverization is good, and the particle size distribution is uniform.
The above is an application for the Ultra-Micro Mechanical Steam Jet Mill Classifier in the industry.
Here, the following describes the working principle of the Ultra-Micro Mechanical Steam Jet Mill Classifier device:
L, the hierarchical device utilizes the attachment of the jet to inertia, centrifugal and suspending force Take effective combinations to design a novel ultrafine powder jet classifier. The grading machine has reached, high precision, can be graded, medium and fine powder three levels of products.
2, the jet classifier does not have any moving parts, with a high pressure air to work media. Reliability for the classifier host, convenient maintenance and maintenance. The adjustment of grading granularity is also very convenient, and only the flow meter and several gate valves disposed on the machine can easily adjust the grading particle size.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Technical parameters:
Finished granularity: D90: 800 目
Production capacity: 800-1000kg
Users who need to purchase Ultra-Micro Mechanical Steam Jet Mill Classifier products can choose Shandong El Pie Powder Technology Co., Ltd., this is a manufacturer specializing in the production and sales of various eddy current crushers, affordable, after-sales service.
