Ultrafine Crushing Steam Jet Mill Classifier's balance performance is good, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Ultrafine Crushing Steam Jet Mill Classifier makes up a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization. . Since Ultrafine Crushing Steam Jet Mill Classifier's crushing chamber structure is simple, it is easy to manufacture, so it is widely used.What are the characteristics of Ultrafine Crushing Steam Jet Mill Classifier? Ultrafine gas flow classifier, especially for brittle materials, the hardness of the material is suitable in Moglide 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake air is large, is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.
How to continue Ultrafine CRUSHING Steam Jet Mill Classifier Life? Here are the following aspects:1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault.
2, when the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3, regularly check the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, and ordinary calcium based grease is applied.
El Pishang Active Carbon Ultrafine Crushing Steam Jet Mill Classifier Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research, thereby conducting research. Investigate a number of domestic manufacturers, and finally choose to cooperate with us, purchased a Ultrafine Crushing Steam Jet Mill Classifier.
