AIR Classifier of Silica GEL is mainly suitable for the characteristics of a wide range of applications and high finished products, and is widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractory materials, pharmaceuticals, pesticides, food, and health. Products, new materials and other industries.
AIR Classifier of Silica GEL provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber tape, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.Let's take a look at how to extend the use of Air Classifier of Silica Gel:
1. Strictly follow the operating procedures;
2, easy to damage parts should pay attention to time check, timely replacement .
3, the device body has no rotating parts, which is not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our company's body part is made of special material, the tip service life is at least more than one year, the knife tip is more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife pointer;
4. It is recommended to use a long filter device to improve equipment stability, and ensure grading precision.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
A energy company is a battery positive material production enterprise, with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc. The top of the list.
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 300kg
