Environmentally friendly Steam Jet Mill for Besylate has gradually become the market leading to mechanical equipment, and modern new mechanical equipment in the machinery manufacturing industry in the stage of the stage has gradually replaced the traditional rough mechanical processing and production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.
Now the variety of Steam Jet Mill for Besylate is very large, and its grading quality and level are very different. In general, the evaluation of grade grading performance is expressed in grading efficiency and grading accuracy. But the current level of grading efficiency and grading accuracy have many inconveniences in practical applications. Through the analysis of the classification efficiency of the collected evaluation grade performance and the level of grading accuracy.
Steam Jet Mill for BESylate works with high-speed rotating hammers impact materials, crushing the decision surface, the obedient surface and the natural gap. The material sent to the crusher was shocked by the rotor, and the rotor rotated around the central axis at a speed of 25 to 40 m / sec and was broken first. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.
Steam Jet Mill for BESylate is widely used, do you know how to use it correctly? The following content hopes to help you. 1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5,Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Aluminate Steam Jet Mill for BESylate Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattering similar companies in foreign countries.And the price is more advantageous than foreign similar import companies.Finally, our Steam Jet Mill for Besylate was purchased as a production equipment.
Technical parameters:
Finished granularity: D97: 20μm
Production capacity: 100kg
The equipment market is the moment of changing, and the current Steam Jet Mill for BESylate has certain in the market.Demand, but the society is constantly evolving, no matter what industry needs to keep pace with the times, it can lead the industry.
