With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.
A Steam Jet Mill Machine of Manganese Carbonate costs, if you want to use Steam Jet Mill Machine of Manganese Carbonate for a long time, please pay attention to the following:
1. Production In the process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. SpectEAM Jet Mill Machine of Manganese Carbonate's host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seventeen introduction to the daily maintenance of Steam Jet Mill Machine of Manganese Carbonate for you.
Working principle: Transform compressed air or superheated vapor through the nozzle to a high-speed airflow, when the material is sent to the puller chamber by the feeder, a strong impact and a strong impact and Dramatic friction makes the material into a super fine product.
There are some industries like our food or chemicals, pharmaceutical industries, etc. It is made of material comminution. The crusher is mainly used to preprocessing in various industries. The main role is also processing the material with a relatively large diameter or compared.Small particulate material.
Steam Jet Mill Machine of Manganese Carbonate is widely used, do you know how to use it correctly? The following content hopes to help you.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Seaweed Feed Steam Jet Mill Machine of Manganese Carbonate Case Sharing: The company is a seafarer enterprise in Yantai. It has been found to be pulverized to seaweed during breeding. It can be used as a feed for sea cucumber after pulverization. The cost of purchasing. By comparing the long-term use of Steam Jet Mill Machine Of Manganese Carbonate, it is possible to purchase the feed for several years. The cost of the production line can save. The company purchased our AlPa Steam Jet Mill Machine of Manganese Carbonate.
Technical parameters:
finished particle size: D90: 400 目
Production capacity: 400kg / h
Shan dong alpa is a scientific and technological private enterprise producing various airflow pulverities, integrating development, manufacturing and application.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.
