The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.
Jet Mill Grinder for Silicon Oxide works mainly, after the material is accelerated through the nozzle, the compressed air enters the flow of the pulverized area, and the material is fluid, each particle has the same movement. state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.The main performance characteristics of the airflow pulverizer: 1, it contains vertical classification equipment, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassembled and cleaned, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process. 3. The control system uses program control and easy to operate.
Installation, operation and maintenance is three important factors using Jet Mill Grinder for Silicon Oxide. The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. Boot is a standard, for the first time to contact and use this kind of equipment, it is always a very strange state. In fact, it is very simple, the best way is to familiarize yourself with the consumer content on the instructions or have no use value. Timely specification and familiar. After each startup, check the airflow pulverizer in time to develop good usage habits. In the future, we don't need to pay attention to and familiarize.
The airflow pulverizer has improved and improved from the design and component combination, gave us a lot of help. It is good quality, but it is also declined for a long time without maintenance and maintenance. Check the operating components, electrical components, and transmission. Once an abnormality occurs, please repair it in time, without a fault, gas mill, prevent accidents.
AlPa Aluminum Silicate Jet Mill Grinder for Silicon Oxide Experiment: A environmental protection technology company needs to grade aluminum silicate ultrafine powder due to production demand.Because it is not possible to achieve the demand, the experiment can be experimentally, and the aluminum ultrafine powder provided by the company can be classified by experimenting our ALPA air grade machine equipment. Finally, the product particle size obtained by the experiment: D90: 18.3μm,Yield: 460kg / h Add the amount.
If there is related requirements, please call us!
