Jet Mill for Stainless Steel Powder is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
Jet Mill for Stainless Steel Powder is different from other crushers, which is made through collision between particles, airflow impact, shear, high-speed airflow, etc. Crushing pulverizer. It has the following main features:
1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
Jet Mill for Stainless Steel Powder features
1, suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
The privacy of the useful life and quality of Jet Mill for Stainless Steel Power Powder has the following:
1. Material properties.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable It will lead to the difference in crushing effect, the strength of the material is a heavyIt is necessary to factors, and high intensity is also reduced in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.
AlPa Steel Slag Jet Mill for Stainless Steel Powder case share: This customer is Xi'an Steel Residue Application Technology Co., Ltd., mainly engaged in the reuse of steel slag.During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.
Case parameters:
Product particle size: D97: 5-75μm
Hours Yield: 200-500kg
