Steam Jet Mill Pulverizer for Fluorescent Pigment plays a crucial role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, food manufacturing industries are widely used. With the continuous development of Steam Jet Mill Pulverizer for Fluorescent Pigment, the major industries, especially pharmaceuticals, and the food industry proposes the purity of materials during pulverization. The new requirement, I hope the powder can keep it clean. In traditional Steam Jet Mill Pulverizer for Fluorescent Pigment, carbon steel, stainless steel is generally used as a lining material for Steam Jet Mill Pulverizer for Fluorescent Pigment.
Steam Jet Mill Pulverizer for Fluorescent Pigment's main performance characteristics:
1, it contains vertical hierarchy devices, product size D97: 8 150 microns adjustable, granular shape, and particle size distribution narrow. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.
The working principle of Steam Jet Mill Pulverizer for Fluorescent Pigment is to use high-speed rotating hammers to hit materials, crush the decision surface, the obedient surface and the natural gap. The material sent to the crusher was shocked by the rotor, and the rotor rotated around the central axis at a speed of 25 to 40 m / sec and was broken first. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are tightened. 3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5, check that there is material or material in the broken cavity orOther debris, if sometimes it should be handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
ALPA carbonate Steam Jet Mill Pulverizer for Fluorescent Pigment case Share: This customer is a company that sells lithium carbonate, lithium hydroxide, potassium sulfate, and salt, selling carbonated in it.During the lithium, it is found that the current customer needs is ultrafite powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchased the number of ALPA's multiple Steam Jet Mill Pulverizer for Fluorescent Pigment.
Finished particle size: D50: 5-8μm
Production capacity: 450kg
Shan dong alpa is a variety of gas flow crusher, air flow mill, discDevelopment, manufacturing and application of airflow pulverizer, disc gantry pulverizer.
