Steam Jet Mills for Kelp is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Steam Jet Mills for Kelp is based on The size of the powder particle size is different, and the grading process is performed in the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.
The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.
The broad grade is to divide the particles into different parts of the particle size, density, color, shape, chemical composition and radioactivity. The narrow grading is based on different particle diameter particles in the medium (usually air and water), which produces different motion trajectories, thereby achieving different particle diameter particles.
After understanding the basic concepts of grading, let's learn about the grading principle of the next classifier.
The classifier is a precision airflow classification device that can be divided into 3 products of 3 products in a thicker, medium and fine powder. The raw material powder is continuously supplied to a hierarchy without a rotating member by a feed tube that is powered by the compressed air; dividing the raw material powder into fine powder, medium powder, and coarse powder at a time by precision control of the airflow. Each product is trapped in the subsequent cyclone dust collector and dust collector.
Steam Jet Mills for Kelp should be maintained and maintained
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.
ALPA precipitation method White Carbon Black Steam Jet Mills for Kelp Case Sharing: The customer is an Egyptian company, from our English official website to our supermuffer experience of white charcoal black.There are a number of cooperative customers.Through the incoming experiment and on-site visit.Identified our ALPA strength and finally purchased Steam Jet Mills for Kelp from our company.
For more consultation, please continue to pay attention to us, or inquire.
