Steam Jet Mills for Colistus Sulphate is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, AlPa crusher is fine, granules are delicate, affordable.
A Steam Jet Mills for Colistus Sulphate is very high. If you want to use Steam Jet Mills for Colistus Sulphate for a long time, please pay attention to the following:
1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. The host and level score bearing of Steam Jet Mills for Colistus Sulphate are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point of introduction to the day-to-day maintenance of Steam Jet Mills for Colistus Sulphate.
The crushing chamber of Steam Jet Mills for Colistus Sulphate is arranged in a particularly designed high-pressure intake nozzle, which is filled with purification and dry compressed air, and forms an ultrasonic air flow. . Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.
The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverizing chamber, the same one is at the edge of the turbine in the edge of the turbine.Particles will be affected by two different efforts (i.e., centrifugal inertia and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.
AlPa Quartz Sand Steam Jet Mills for Colistus Sulls Searz Sharing: This customer needs to grade quartz sand, compared to many powder equipment manufacturers, and finally pass the experiment, finally choose our AlPA classifier equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.
ALPA also believes that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.
