Jet Mill for Calcined Talc

Jet Mill for Calcined Talc is used as a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine raw materials, and test from a few tens of grams of trace test At the time of hundreds of tons of large production, gas flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermistory drug; good sealable, low pollution; Easy to operate; crushing-mixed-dry online operations, etc. have been widely recognized by the company.

Jet Mill for Calcined Talc's main performance characteristics:

1, which contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.



In order to achieve better use, you must also pay attention to the daily maintenance of Jet Mill for Calcined Talc, pay attention to the following:

1. During the production process, the airflow grinding bed bearing should be checked, and when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.

2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.

3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.

4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.



ALPA Chemical Pigments Jet Mill for Calcined Talc Case Sharing: The company is a professional company that specializes in high performance organic pigments. In its production process, the pigment is needed Crushing equipment. The company's ultrafine crushing equipment is from our AlPa, which uses our company's Jet Mill for Calcined Tower.
Technical parameters:

Finished particle size: 10-45μm

Production capacity: 300kg


If there is related requirements, please call us!