Jet Mills of Tar Particles

As is well known, Jet Mills of Tar Particles This product technology has received extensive attention from the industry.

Jet Mills of Tar Particles were attached to the powder industry. Jet Mills of tar particles is a supersonic air flow through a nozzle to form a supersonic air flow by a nozzle after refrigeration, filtration, drying. Accelerated materials gather in the intersection of multiple nozzles jet gas flow, resulting in severe collision, friction and shearing, thereby achieving ultrafine pulverization of particles. Air flow grinding has the characteristics of low energy consumption, stable operation, simple structure, convenient operation and maintenance. It is real multi-purpose, high efficiency, low-cost new crushing equipment. It can be said that modern industrial production is inseparable from airborne flow, but air flow milling equipment often requires continuous operation, long working hours, which is greater than the equipment itself is large.

Jet Mills of Tar Particles Applicable range: The grinding mechanism of the machine determines that its application range is wide, and the fine finished product is high. Typical materials are: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemical, low temperature requirements: medicine, PVC.

Ultra-micro Jet Mills of Tar Particles before debugging:

1, newly installed equipment, inevitably residual iron blocks, welding head, welding when the equipment is connected and pulverized to the warehouse Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.

2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.

ALPA crystal sorbitol Jet Mills of tar particles case share: Taiwan's cosmetic company requires a large amount of crystal sorline crush production line, through our Shan Dong Alpa agents to understand our company The commissioning equipment can be customized. After many incident experiments.The final purchase of Jet Mills of Tar Particles in our company.

Technical parameters:
Finished granularity: 10-200 目
Production capacity: 10T

For more knowledge about Jet Mills of Tar Particles, please pay attention to Shan DongALPA website, company is trustworthy by the company's popularity and other products, high quality, high quality.