Environmentally friendly Jet Mill Pulverizer for BRAN has gradually become the market leading to mechanical equipment, and modern new mechanical equipment in the machinery processing and manufacturing industry in the stage has gradually replaced traditional rough machining production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.
Jet Mill Pulverizer for BRAN is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.The principle of Jet Mill Pulverizer for BRAN is to use the relative movement between the active tooth disc and the fixed tooth pan, which makes the material between the abduction, friction and materials from each other; impacts. The combined material is automatically entered into the prenatal bag through the effect of rotating centrifugal force, and the dust is filtered by the vacuum cleaner. Our constellation machine's crusher is designed according to the \"GMP\" standard, all of which are manufactured in stainless steel materials, and there is no dust in the production process. And can improve the utilization rate of materials, reduce the cost of enterprise, and have reached a high level of professionalism.
Ultra-micro Jet Mill Pulverizer for BRAN before debugging work:
1, newly installed equipment Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, you can use your hand or fine powder to have no in the interface.Feeling, if you have a sealing process. After all of the above tests are normal, prepare the material production.
A silicon micron powder is a manufacturer of silicon fine powder, and the company has strong technical strength, advanced The test instrument, perfect pre-sales, sale and after-sales service, can provide high-quality crystalline silicon powder, high-purely molten fine powder, high white ultra-fine silicon powder, etc. The company is committed to providing advantageous solutions and services for other functional applications such as electronic materials, special ceramics.
The company continues to innovate around customers, and has always adhered to customer-centric, quickly responding to customer needs, and tailor-made quality products for customers, and continues to create long-lasting value for customers to achieve customers
case parameters:
Product particle size: D100: 15UM
Hour Yield: 300kg
