Currently, Steam Jet Mill Grinder for Albite has gradually entered people's lives, more and more plants, and companies are using the equipment.
Steam Jet Mill Grinder for Albite Production Lines usually have pulverizer, bucket hoist, storage box, vibrating feeder, ultrafine mill, frequency classifier, cyclone powder collector, pulse dust removal system, High pressure blower, air compressor, electrical control system and other components. Eliminates the infrastructure construction link, saving overall production costs, reducing material consumption. In addition, crushing and grinding operations can also be completed, reducing equipment and minimizing cost investment.What is the grading principle and process of Steam Jet Mill Grinder for Albite? Below, you will share with you.
1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.
1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, can you work properly? .
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time,To remove the inner sticky of the chalk, avoid clogging, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
AlPa Gypsum Steam Jet Mill Grinder for Albite Case Sharing: The company is a well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine micropowder of non-metallic mine such as stone and gypsum. Through our website, we learned our equipment and read our case. Finally, I finally chose to buy our company Steam Jet Mill Grinder for Albite as its gypsum ultrafine powder production line.
Technical parameters:
Finished product granularity: D97: 5UM
Production capacity: 140kg
The performance characteristics of various models of the mill is different, different particle size, different production efficiency, Different production and production environment, the price of processing equipment is also different, customers can consult the ALPA engineers to purchase appropriate models and specifications according to their own situation, welcome to inquire.
