Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Steam Jet Mill Pulverizer for Manganese DioXide can effectively improve the level of massage of materials, and greatly improve productivity. Steam Jet Mill Pulverizer for Manganese Dioxide has received much attention, and the prospect has also been optimistic about many people.
Steam Jet Mill Pulverizer for Manganese DioXide is a high-speed airflow to form a high-speed airflow with multiple relative-arranged nozzles. The crushed material enters the grading chamber with the rising airflow. Since the grading rotor is rotated at high speed, the particles are subjected to the centrifugal force generated by the hierarchical rotor, and the centrifugal force generated by the viscous action of the air flow. When the centrifugal force of the particles is greater than the heart force, that is, the grade particle diameter The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet can increase the pulverization efficiency than the conventional gas flow grinding machine, and the grading accuracy is higher. ALPA equipment is small, and the structure of the pulverizer can be highly machined from the ultrafine powder to avoid the wear of the horizontal grading machine grading part. Under the same material, the service life of the equipment is multiplied by the international similar products. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.
Steam Jet Mill Pulverizer for Manganese Dioxide Work: Crusher and Cyclone Separator Distant Machine Encompasses a complete crushing system, compressed air is filtered and dried, and then through the Lavar nozzle in multiple high pressure air The intersection enters the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.
1,Check if the lubrication of the bearing is good
2. Check if all fasteners of the pulverizer are fastened. 3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
ALPA Steam Jet Mill Pulverizer for Manganese Dioxide case share: Yantai's pectin shares, the company needs to purchase a superfine pulverized apparatus for pulverizing gelatin. Through multi-party investment and incoming experiment, the company purchased our ALPA Steam Jet Mill Pulverizer for Manganese Dioxide as its pectin ultrafine pulverized equipment.
Technical parameters:
Finished particle size: 60-200 目
Users who want to view crusher related information can also log in to our website!
