Steam Jet Mills for Print Toner is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Steam Jet Mills for Print Toner It is widely used in chemical, food, medicine, dry and other production industries, and plays a certain role in these industries. In addition to the above industry, there are also industries such as minerals, paints, metallurgical, and even the scientific research units need Steam Jet Mills for Print Toner. Choose the right Steam Jet Mills for Print Toner not only guarantee the quality of materials, but also bring direct economic benefits to your business.
Ultrafine Steam Jet Mills for Print Toner Working Principle: The ultrafine pulverizer is fed into the feeder of the material and the mass of the body and the guide circle, rotating at high speed in the comminution. Under the blade impact, the material is attached to the gel fixed to the body, resulting in impact, shearing, and material, the material and the blade, the mutual collision, friction, and shear inter alternate. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The fractionation impeller consists of the blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, and the powder particles in the leaf can be subjected to a negative pressure gas stream and the granularity of the granules, the centrifugal force generated by the impeller, and the particles are larger than the critical diameter ( The granular particles of the grading particles are large, and the pulverized chamber continues to be pulverized, and the particles smaller than the critical diameter are discharged through the drain tube into the whirlwind collector. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.
Any mechanical equipment that has certain precautions before use, must check the precautions to operate, so that the damage rate is lowered, so Steam Jet Mills for Print Toner takes before use. What preventive measures?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.
AlPa Water Available Feni50Steam Jet Mills for Print Toner Case Sharing: This customer needsIt is necessary to make an ultrafine pulverized apparatus for metal powders.Finally, we purchased our AlPA CSM710-V mechanical grinder.
Technical parameters:
Production capacity: 200-250kg
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
