In this economic boom, there are many people who know the air current pulverizer, Jet Mill Grinder for Graphene technology is in a leading position in the same industry.
The variety of Jet Mill Grinder for Graphene is now very much in the market, and its grading quality and level are very large. In general, the evaluation of grade grading performance is expressed in grading efficiency and grading accuracy. But the current level of grading efficiency and grading accuracy have many inconveniences in practical applications. Through the analysis of the classification efficiency of the collected evaluation grade performance and the level of grading accuracy.
JET MIINDER for Graphene Principles: When the compressed gas enters the pulverizer through the feed injector, the pulverized raw material enters the pulverizer, there are a plurality of pulverized nozzles in the pulverized chamber, and the supersonic air flow is injected, so that the material is high-speed shock from the airflow. And the materials collide with each other, friction and pulverize, the grading tube separates the coarse particles, the crude particles continue to be pulverized, and after the internal closed circuit circulation is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.Jet Mill Grinder for Graphene is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, minimize the damage rate, then What is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine. 2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
ALPA sodium bicarbonate Jet Mill Grinder for Graphene case share: the companyIt is often used to use Jet Mill Grinder for Graphene, and the power plant dry desulfurization is often used, and the sodium hydrogen carbonate is needed.The company has won many power plant dry desulfurization projects with our AlPa's cooperation.It is very satisfied with the Jet Mill Grinder for Graphene we produced.
Technical parameters:
Production capacity: 800kg
If you have use in Jet Mill Grinder for Graphene, please feel away from our AlpaContact,
