As is well known, Jet Mill Pulverizer of Ferric Oxide has attracted extensive attention from the industry.
In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. Jet Mill Pulverizer of Ferric Oxide's operational rules are as follows: After the preparation before the boot receives the production order, prepare the material. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, JET MILL PULVERIZER OF FERRIC OXIDE starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, Jet Mill Pulverizer of Ferric Oxide's closed and inspection The main procedures are as follows: After the material in the shell housing is completely pulverized, the feed should be stopped and the motor should be closed. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.
What kind of performance characteristics have jet mill pulverizer of ferric oxide?
This classification device adds vertical grading equipment, product production in design and research and development The particle size can achieve fine tuning between 97-150 mm, and can produce a good granular shape, narrow distribution, and a plurality of particle segments. There is also a classifying machine in disassembly cleaning, more and more rapidly, and the inner wall is smooth without dead angles. The whole system is closed, less dust, low noise, and the production process is clean and environmentally friendly.
Now let's talk about the troubleshooting of Jet Mill Pulverizer of Ferric Oxide.
1, feed back irrigation: Improper tunnel adjustment, pipeline clogging, screen jam, dust bag gas permeability or severe wear, hammer wear is serious, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
ALPA Light Burning Magnesium Jet Mill Pulverizer Of Ferric Oxide Case Sharing: This customer is a device company, focusing cement, mine, chemical, electric power, metallurgy, etc., mainly engaged in the establishment of these industries With equipment, the customer needs to support its customers more suitable airflow classification equipment. After many exam, we have chosen our ALPA air grade machine. Buy two devices. Product particle size: D80: 15μm hour yield: two 15t / h.
Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.
Weifang ALPA airflow crusher price, our company is equipped with large-scale test workshops to meet the 1: 1 industrialized test of different customers from 100 mesh-6000 points, mainly for new energy materials and other industries
