It is well known that Steam Jet Mill Machine for Ferroalloy has been widely valued by the industry.
Steam Jet Mill Machine for Ferroalloy is suitable for microcanic machinery of materials such as synthetic resins and instruments. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.Steam Jet Mill Machine for Ferroalloy Work: By manual, the material is uniform, fed into the pulverized port, and the various straw cut into small sections under the action of the fixed knife and rotary knife. Then enter the crushing chamber, under the strong hit of the high-speed hammer, the material is rapidly pulverized, due to the large amount of the wind pressure and the large amount of wind pressure in the built-in fan, the pulverized material falls into the screen. The lower chamber is sent from the wind pressure transfer pipe to the aggregate room.
In order to achieve better use, you must also pay attention to the daily maintenance of Steam Jet Mill Machine for Ferroalloy, pay attention to the following:
1. In the production process, you should regularly check the airflow grinding bed Liter, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.
ALPA Quartz Powder: Non-Metallic Melting Composite Powder Steam Jet Mill Machine for Ferroalloy Case Sharing:
A new material company is a national high-level high-level high-level development, production, sales and technical services. Technical enterprise. The company focuses on the pressure and challenges of our customers, excavation of the potential of inorganic non-metallic materials, integrates all kinds of organic materials, providing excellent functions and low-cost split solutions, vigorously expands in new energy, Application of New Materials, Environmental Saving and Energy Saving and Other Fields.
The company and the domestic inorganic non-metallic materials, the company, the benefit of the resources, excellent reserves, and serve the ecological chain platform, serving major multinational companies, listed companies and excellent domestic small and medium-sized enterprises, continuously introducing cost-effective products, creationCustomer value to achieve capital value.
Case parameters:
Product particle size: D100: 14UM
Hour Yield: 600kg
Welcome everyone to inquire!
