Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder grinding materials, Steam Jet Mill Grinder for Zeolite is the most effective in achieving fine powder milling One of the equipment. In China, after 20 years of development, Steam Jet Mill Grinder For Zeolite industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.
Many manufacturers who want to make a crushing process will choose to buy a Steam Jet Mill Grinder for Zeolite, but not all crushers can apply production and processing, erroneous processing methods will make pulverizing velocity quick. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires a periodic replacement loss for uniformity. The products after crushing are generally single peaks, and if there is a double-peak or peak, there is a unstable pressure. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.
Steam Jet Mill Grinder for Zeolite Working: Crusher and Cyclone Separator Distant Machine Encomps a complete crushing system, compressed air is filtered and dried, then through the Raval nozzle in multiple high pressure air Enter the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.
Steam Jet Mill Grinder for Zeolite How to control the size of the particle size?
The smaller the particle size of the raw material, the higher the pulverization efficiency, the greater the particle size of the raw material, then the pulverization effect is relatively low. In the case of crushing pressure and feed pressure, reduce the feed speed product will be finer, and improve the feed speed product will become thick. In the case of a certain amount of feed, improve powderThe granularity of the crushed pressure product will be finer, reduce the pulverization pressure, and the product will become thick.
So the particle size control is the adjustment of the parameters during the pulverizer to achieve different pulverized fineness, and it is necessary to measure the relationship between the feed velocity and pressure before crushing and then determine the appropriate pulverization parameters.
Technical parameters:
Finished granularity: D90: 800 目
Production capacity: 800-1000kg
