Steam Jet Mills for Bone Meal

As is well known, Steam Jet Mills for Bone Meal This product technology has received extensive attention from the industry.

Steam Jet Mills for Bone MEAL is based on the size of the particle size, the shape, and the density is centrifuged, no water, no water washing, complete dry method, can obtain a narrower, non-polluting microemetry, non-polluting micropowder;

Efficient grading, eliminating wear technology, reliability, no leakage technology, large particle control technology, fine powder extraction technology, complete, stabilized flow field design technology, constant gas-solid concentration than design technology, regulate a certain number of product yields
Small wear, can be highly purified, ultra-narrowly machined ultrafine powder, avoiding the wear of the horizontal grade machine. Under the same material, the service life of the equipment is more than 5 times the ordinary classifier;
High grading accuracy, stable and complete hierarchical flow field, and special sealing measures, reliably prevent leakage of crude particles, vertical Circulation in the turbine grading machine guarantees qualified product particle size;
full-negative pressure, no dust pollution, equipment does not need to do the foundation, convenient for maintenance and maintenance. Online detection can be implemented according to user needs, and automatic automatic unmanned production operations are implemented.

Ultrafine Steam Jet Mills for Bone Meal Working Principle: Ultrafine Crusher Tested by the feed port spiral feeder, feed the material into the crushing chamber between the body and the guide circle, in the pulverization room Under the impact of high-speed rotating blade, the material is attached to the gear fixed to the body, causing impact, shearing, and material, the material and the blade, the mutual collision, friction, and shear inter aligns. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The fractionation impeller consists of the blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, and the powder particles in the leaf can be subjected to a negative pressure gas stream and the granularity of the granules, the centrifugal force generated by the impeller, and the particles are larger than the critical diameter ( The granular particles of the grading particles are large, and the pulverized chamber continues to be pulverized, and the particles smaller than the critical diameter are discharged through the drain tube into the whirlwind collector. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.

Any machine device must pay attention to it before use, you must pay attention to use, operation, make it damaged by minimize, then what should you pay attention to before using Steam Jet Mills for Bone MEAL?

1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, willBefore adding a pulverizer, it is not possible to mix the crumples to avoid damaging the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.
ALPA Buckwheat Powder Steam Jet Mills for Bone Meal Case Sharing:
A food company is a large joint venture specializing in the production and sales of beverage food.
From the development of a single variety to the production of various products, the products produced are all over the country.
The company has PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, PET blower. The annual production capacity reached 300,000 tons. The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.
Case parameters: D50: 3-45UM
Hour Yield: 1-5kg

To learn more about Steam Jet Mills for Bone Meal, to SHAN DONG ALPA, the company is in research and production of crusher and crusher related products, quality multiplication, and is trustworthy by consumers.