Steam Jet Mill of Titanium Dioxide

With the development of society, the application of Steam Jet Mill of Titanium Dioxide has become more large.

Steam Jet Mill of Titanium Dioxide is applied to the ultrafine pulverization of the material. After the material is extracted, the powder's properties will have a large change, and it appears as high viscosity after being affected. . Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shan dong alpa design-developed material smashed hit in the crushing of materials.

Steam Jet Mill of Titanium Dioxide Compressed Gases Included material particles in the bucket into the disc shocking chamber 3 by the high-speed jet produced by the feed nozzles, and there are several jet nozzles around the crushing chamber. The high-speed fluid is sprayed in the direction, producing an ultra-high-speed swirl in the crushing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized to the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles has not been fully utilized, so the production energy consumption is still high.
Characteristics of Steam Jet Mill of Titanium DioXide
1, for ultrafine pulverization for dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.

2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.

3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
Steam Jet Mill of Titanium DioXide is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, minimize the damage rate, So what is the precaution before using a jet ball mill? Here are some introductions.
1Before use, check whether the firmware is tightened, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.

3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.

4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
ALPA gel method White Carbon Black Steam Jet Mill of Titanium Dioxide case Share: The main products of the customer include beer silica gels, an openings, catalyst carriers, and the like. The company purchased our ALPA Steam Jet Mill of Titanium Dioxide.
Technical parameters:
finished particle size: D50: 12-16UM 10-12UM
Production capacity: 250-450kg

Steam Jet Mill of Titanium Dioxide produced by our company can not only From the ordinary powder, 20-2 μm is separated from fine fine powder, and can be used directly with the mechanical pulverization equipment, forming a closed circuit, improving the pulverization efficiency, and avoiding the production of high temperatures in the cavity to cause adhesion, glue, resulting in The homework cannot be carried out, and the grading machine has also received a good review of the majority of users, and the friends who need it will contact us!