In the classification operation of industry production at this stage, the use of Jet Mill Crusher For Grass is mainly targeted by solid particles, and is the case where we are more commonly used in the product ultrafine pulverization process.
Jet Mill Crusher For Grass provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber tape, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.Jet Mill Crusher For Grass uses material to achieve huge kinetic energy under high-speed airflow, causing severe friction between high-speed collisions and particles in the pulverizing chamber, while high-speed airflow generates shear effects, thereby achieving The purpose of pulverization.
Jet Mill Crusher For Grass is widely used, do you know how to use it correctly? The following content hopes to help you.1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops is:
inverter-feeder-main air valve-compressor-stage impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor.
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Kaolin Jet Mill Crusher For Grass Case Sharing: The customer is a Kaolin Powder company in India. The customer needs a grading equipment to select the kaolin ultrafine powder, and some companies have not found it. suitable. Finally, our AlPA meets the customer needs for the classifier equipment provided. The set of equipment has reached 4T per hour.
If the later period is intended for superfine grade machines, precision grading machines, jet classifiers, you can directly contact us, product quality is guaranteed, fair, good service, welcome everyone to buy!
