Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Jet Mill Crusher of Glass Flakes can effectively improve the level of massage of materials, and greatly improve productivity. Jet Mill Crusher's Of Glass Flakes has received much attention, and the prospect has also been optimistic about many people.
Jet Mill Crusher's Of Glass Flakes is mainly used for more refined materials. The graded particle diameter is 1.5 to 0.005 mm, and the crude material is sieved. The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind grading equipment typically requires an appropriate fan (exhaust or blast).
When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the feedstock is sent together with the airflow into a grading device. It is well known that the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.
The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.
In the rising airflow, the gas flow rate required to suspend the particles having a certain density and particle size is greater than the calculated value of the free settling, which is due to the uneven distribution of the airflow along the hierarchical chamber portion.
The Jet Mill Crusher of Glass Flakes has the characteristics of high grading range, high grading efficiency, high level precision, accurate cutting particle size, and good stability.
JET MILL CRUSHER OF Glass Flakes Applicable Scope: The Grinding Mechanism of the MachineIt determines that its application range is wide and the finished product is high. Typical materials are: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemical, low temperature requirements: medicine, PVC.
Jet Mill Crusher Of Glass Flakes should be maintained and maintained
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact. 4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.
ALPA Buckwheat Powder Jet Mill Crusher Of Glass Flakes Sharing:
A food company is a large joint venture specializing in the production and sales of beverage food.
From the development of a single variety to the production of various products, the products produced are all over the country.
The company has PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, PET blower. The annual production capacity reached 300,000 tons. The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.
Product particle size: D50: 3-45UM
Hours Yield: 1-5kg
Is it more learned from Jet Mill Crusher Of Glass Flakes? NS. For more information, continue to pay attention to our website.
