In many crushing methods, Jet Mill for Calcined Kaolin has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.
The variety of Jet Mill for Calcined Kaolin is now very large, and its grading quality and level are also very large. In general, the evaluation of grade grading performance is expressed in grading efficiency and grading accuracy. But the current level of grading efficiency and grading accuracy have many inconveniences in practical applications. Through the analysis of the classification efficiency of the collected evaluation grade performance and the level of grading accuracy.
Jet Mill for Calcined Kaolin Operation Performance: In the cyclone dust collector, the bag dust collector is assisted, the host is set in the centrifugal grading device, which can be fine grind, and has a classification function, the wind is cut, no sieve Or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, and the ultra-fine classifier is widely used in chemical, dyes, paints, pharmaceuticals, food and other industries.In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
ALPA High Pure Stone Powder Jet Mill for Calcined Kaolin Case Sharing:
A quartz company collects mine, processing in one, production scale and market share are in front of domestic counterparts.
The company has strong technical strength, advanced testing instrument, perfect pre-sales, sale, after-sales service.
The company continues to improve and improve product quality, adopted IS09001: 2008 international quality management system certification, the company strives to strive to excellent product quality and excellentQuality service meets the customer's requirements.
Case parameters:
Product particle size: D50: 3.5UM
Hour Yield: 800kg
