Micro Steam Jet Mill Machine

We all know that Micro Steam Jet Mill Machine is a very strong airflow, many stubborn and hard materials that encounter a crusher will be cut into a uniform block of pieces,

for micro Steam Jet Mill Machine has a longer service life, so that good performance has been maintained, and you need to keep in mind usage.
1. For new buying equipment, novice must understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses due to improper operation during operation.
2, if the operation is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair commissioning and turn off the power. Non-designated personnel prohibit private commissioning or disassembling machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Micro Steam Jet Mill Mail Machine is cleaned promptly after use. Keep the internal cleaning of Micro Steam Jet Mill Machine, avoiding oxidation of the material and the inner contact.

The pulverization chamber of Micro Steam Jet Mill Machine is arranged in a particularly designed high-pressure intake nozzle, which is incorporated from nozzle through purification and dry compressed air to form an ultrasonic air flow. Materials collided at high-speed airflow intersection centers, and it was pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the whirlwind separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a few microns or even more fine powder. When the pulverized material is pulverized in the pulverization chamber, the same particles at the edge of the turbine will be subjected to two different power of the centrifugal force field (i.e., centrifugal inertia and airflow resistance generated by turbine). When the particles are large, the centrifugal force is larger than the resistance, and the large particles fly toward the chamber pool wall in the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the turbine inside with the rising air flow, and collectively collected as a qualified product via the cyclone separator.

Micro Steam Jet Mill Machine's crushing effect is not to be ignored, and the role playing in production is huge, so the selection of Micro Steam Jet Mill Machine is very important. .

1. Analyze the type, design principle and other equipment of the purchase equipment, what is the structure, what effect is generated, only fully analyzed and understands these issues, in order to make the selected device fully satisfy its production requirements.
2, after the equipment is put into production, the easy-to-lose parts, replacement of the lossless parts, whether the equipment requires auxiliary equipment and operations,
3, reasonable control These will save time and money for future production.
4. To check the factory where you want to buy equipment, because the factory is very costly, and it is very complicated from design to manufacturing. Equipment manufacturers cannot fully introduce it. The equipment technical indicators given are also referenced by the device selection. You cannot fully represent the parameters of the device.
5. When purchasing a crusher, you should purchase a supporting equipment as much as possible so that you can complete the installation, save time, smoothly.
Since the equipment manufacturer is recommended is practical, if it is recommended to use bad equipment to customers, it is undoubtedly a brand. Although it has certain profit purposes, its use and equipment are reasonable, it is built in later periods. Maintenance is also very convenient, this is a good thing for crushing manufacturers.

Elphenic cobalt acid lithium Micro Steam Jet Mill Machine case Sharing: Beijing Lithium Electric Materials Company purchased a Micro Steam Jet Mill Machine from our Elpi in 2020. Ultrafine pulverization for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the company's unique needs, our El Pie's engineers have been working hard to customize a Micro Steam Jet Mill Machine. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by selection of different particle size sections.

Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250kg of lithium cobalt acid lithium large particles: 500KG ternary: 500kg

Users who need to purchase Micro Steam Jet Mill Machine products can choose Shandong El Pieces Technology Co., Ltd., this It is a professional manufacturer of various types of eddy current crushers, affordable, and after-sales service.