In this economically flourished area, many people know that Micro Steam Jet Mill Micronizer, crusher technology is in a leading position in the same industry.
Micro Steam Jet Mill Micronizer is powered by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radial direction of the pulverized chamber and is distributed at the same level. The jet stream rotates with the material with a very high speed, forming a fluid power characteristic on the radius of the pulverizer. Material particles collide with huge momentum. Material As airflow high-speed exercise, a serious impact, friction and shear of the grinding chamber, resulting in wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high-speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the motion of the machine gun, the inner spiral cyclone and outer spiral void are added. The limit is aggregated to the axis of motion to reduce the friction of the tube wall and reduce the metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed and eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone below the broken chamber, the ball media and materials are irregular in the entire simplified body. Scroll, make the ball media and materials have a double effect of collision and grinding, resulting in fine grinding, uniform dispersion.
Micro Steam Jet Mill Micronizer Main Performance Features:
A vertical hierarchical device, the product particle size is adjustable between D97: 8-150 microns, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes.
2, the device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The entire system is closed, the dust is less, low noise, and the production process is clean and environmentally friendly.
3, the control system uses program control and easy operation.
1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Turn on the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From scratch, adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops is:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high.
(2) Checking the wear of impeller, helical conveyors and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After a filter bag, you should clean or replace it.
5, Precautions
(1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs.
(2) The impeller speed must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
El Pien Solid Mannitol Micro Steam Jet Mill Micronizer Case Sharing: A food company requires large production of solid mannitol ultrafine powder. Many domestic powder companies have not found a crusher of food grade-grade production of composite GMP standards. The general composite GMP standard crusher does not meet the large capacity required for the company. With the help of our El Pie, the company purchased 1 Micro Steam Jet Mill Micro Steam Jet Mill Micronizer of our company. The demand of the company's large production of solid mannitol is met, and the GMP standard is met.
Technical parameters:
Finished particle size: mannitol: more than 710 um 7.34%
Production capacity: Mannitol: 2T
El Pie is a top grade of R \u0026 D sales Machine, precision grading machine, laboratory grade machine and other products, is committed to the development of classification machine, welcome friends who need need to come to cooperate.
