People currently use in daily life are also more, the gas flow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is composed, and is usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to become powder, which has canceled traditional screening when performing, and the main application is used in many industries such as mining or building materials. Some industries such as metallurgy or building materials, chemicals, etc. are used to work with large crushers.
EXTRA FINE Steam Jet Mill Crusher is a high-speed airflow to form a high-speed airflow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the grading chamber with the rising airflow. Since the grading rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the hierarchical rotor, and the center of heart is generated by the viscous effect of the airflow. When the centrifugal force of the particles is greater than the heart force, that is, the fractional particle diameter The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air. Low temperature without medium smashing, ensuring high purity and physical characteristics of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the conventional gas flow milling machine, and the grading accuracy is higher. The Erbai equipment is small, the structure of the pulverizer can be highly processed so far powder, avoiding the wear of the horizontal grading machine grading part. Under the same material, the service life of the equipment is multiplied by the international similar products. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.
Extra Fine Steam Jet Mill Crusher's working principle consists of a classifier, a cyclone separator, a dust collector, and a veneer. Under the pulverizer pulling force, the lower end of the gas pulverizer is moved upward to the grading area, and the coarse, and the fine product is separated from the high-speed rotation grading turbine. The cyclonic separator or dust collector is collected by the grading wheel, and the fine particles required to meet the particle size are collected, and the coarse particles are collected. The speed of the ellable fine particles disappears and falls along the two air ports of the cylinder wall. The crude particles and fine particles separated by strong purification of the two winds, and the fine particles rose to twice the grade region, and the crude particles drops to the discharge port.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly. 3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be treated immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked regularly.
Piva Extra Fine Steam Jet Mill Crusher Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattering similar companies in foreign countries. The price is more advantageous than foreign similar import companies. Finally, our Extra Fine Steam Jet Mill Crusher was purchased as a production equipment.
Technical parameters:
finished particle size: D97: 20μm
To understand more product knowledge, you can continue to pay attention to our website. If you need to purchase Extra Fine Steam Jet Mill Crusher, please feel free to contact us.
