Jet Mill of Pyrophyllite can be used in the current industrial production process, and AlPA has been committed to the research and development and application of grading machines for many years. The grading we produced during many years of development. The machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.
The components of Jet Mill of Pyrophyllite include drive motors, graded wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air grade machine can be used in square rock, heavy crystal stone, quartz, gypsum, silica, corundum, cement, alumina, etc., play an important role.
JET MILL OF PYROPHYLLITE is the relative movement between the active gear and the fixed tooth disc, which makes the material to teeth impact, friction and materials from each other; impact. The combined material is automatically entered into the prenatal bag through the effect of rotating centrifugal force, and the dust is filtered by the vacuum cleaner. Our constellation machine's crusher is designed according to the \"GMP\" standard, all of which are manufactured in stainless steel materials, and there is no dust in the production process. And can improve the utilization rate of materials, reduce the cost of enterprise, and have reached a high level of professionalism.Now let's talk about the troubleshooting of Jet Mill Of Pyrophyllite.
JET MILL OF PYROPHYLLITE Troubleshooting:
1, the feedback is improperly adjusted, the door is adjusted, the pipeline is blocked, the screen is blocked, the dust bag is inferior or severe wear, the hammer surface is serious, etc. Cause the feed back. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to check the machine and equipment regularly to ensure normal work.This not only guarantees the safety of people, but also improves equipment efficiency.
ALPA Cases Sharing: This customer is a company, selling new materials such as lithium carbonate, lithium hydroxide, potassium sulfate, and salt, found now in the process of selling carbonateThe customer needs is ultrafite powder of lithium carbonate, so it has upgraded the production line of lithium carbonate and purchased many Jet Mill of Pyrophyllite of our AlPa.
finished particle size: D50: 5-8μm
Production capacity: 450kg
For more consultation, please continue to pay attention to us, or inquire.
