Steam Jet Mill of Meerschaum technology is one of the important basic technologies in the modern industry. In modern industries, the raw materials that require powder state have a small and uniform particle size and higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,
Steam Jet Mill of Meerschaum technology is designed and manufactured in the classification wheel.
There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.
The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
How to install Steam Jet Mill of Meerschaum, the following content hopes to help you.
1, Chinese medicine shredder should be more smooth and easier to use.
2, before the traditional Chinese grinder work, clean processing materials must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.
ALPA White Carbon Black Steam Jet Mill of Meerschaum Case Sharing: The company is a company engaged in white carbon black production. ThatUltrafine pulverization equipment for white carbon black products that can produce two particleids during the production process.After investigation, the last purchase of our AlPa Steam Jet Mill of Meerschaum.
finished particle size: D50: 6.78 D90: 12.8μm
Production capacity: 30kg
ALPA powder is committed to the development of ultrafine powder and grading equipment,Production and sales, support according to demand, equipment model, reliable quality, high efficiency, low energy consumption, easy operation, reasonable price, 24 hours can consult!
