Jet Mill for Plastic Powder can be used in the current industrial production process, and ALPA has been committed to the research and development and application of layers such as grading machines for many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.
Jet Mill for Plastic Powder is different from other crushers, which is crushed by collision between particles, airflow impact, shear, high-speed airflow, and shear and other components. Crusher. It has the following main features:
1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscosity. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.
JET MILL for Plastic Powder Number Distribution is simple analysis, and the material is stacked in the silo plate knot. The material is absorbed, and the material has a bridge in the silo. There is no reason such as the rest of the material. Solving silo does not small materials suggests design phase to fully understand the properties of materials, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive properties. Using auxiliary measures, such as air disc, air hammer, air blowing, vibration discharge mechanism, artificial hitting, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. Material is in advanceThe colloidal pulverization chamber is crushed along the polishing wheel that is circumferential movement along the abrasive rail, cut and cut. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.
Jet Mill for Plastic Powder's feeding system is one of the key components. It is often encountered in actual use, such as the silo, not even if the feed is not uniform, and even can't feed. Simple analysis of non-uniform feeding of feed is more sticky or fluidity, and the design of the feeding system is designed. Feeding uneven resolution suggests based on material properties systemic solution, such as silo structure, auxiliary sheet structure, feeding valve structure, auxiliary feeding measures, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three components, depending on the material properties, the design parameters of the feeding system are different.
ALPA Gypsum Jet Mill for Plastic Powder case share: The company is a more well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine micropowder of non-metallic mine such as stone and gypsum. Our website learned our equipment and read our case, and finally choose Jet Mill for Plastic Powder for our company as its gypsum ultrafine powder production line.
Technical parameters:
Finished granularity: D97: 5UM
Production capacity: 140kg
