Jet Mill Machine for Tungsten Carbide

The people currently used in daily life are also more, Jet Mill Machine for Tungsten Carbide is smashed into standard size, usually smashed into micrometers, usually our equipment There are multiple devices to consist, usually composed of a part of a coarse, fine powder or a wind device, etc. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

Jet Mill Machine for Tungsten Carbide is a classified device with a wide range of applications in the current phase, which has very good fineness in the production of products in production, and can smash silicon carbide. Metal, ore and other substances can also perform purity of ceramics, medicine, and biochemical products with high purity requirements.

Characteristics of Jet Mill Machine for Tungsten Carbide

1, for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.

2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
Jet Mill Machine for Tungsten Carbide Job Safety Application Basic Requirements
1 The line is not allowed to use iron and sticks instead of hair.

2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.

At the same time, check if the leather belt looseness is appropriate.
4Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.


ALPA potassium permanganate Jet Mill Machine for Tungsten Carbide case sharing: The customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I bought a Jet Mill Machine for Tungsten Carbide in our AlPa.
Technical parameters:

Finished granularity:

100-325 目
Production capacity: 5kg

Jet Mill Machine for Tungsten Carbide's usage specification has a lot, thinking Detailed to understand the friends of the ultrafine gas flow classifier, welcome to consult with us!